Descripcion
The Arduino UNO WiFi Rev.2 is the easiest point of entry to basic IoT with the standard form factor of the UNO family. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a Bluetooth® Low Energy device sending data to a cellphone, the Arduino UNO WiFi Rev.2 is your one-stop-solution for many of the basic IoT application scenarios.
Add this board to a device and you'll be able to connect it to a WiFi network, using its secure ECC608 crypto chip accelerator. The Arduino Uno WiFi is functionally the same as the Arduino Uno Rev3, but with the addition of WiFi / Bluetooth® and some other enhancements
Especificaciones técnicas:
| Microcontroller |
ATmega4809 |
| Operating Voltage |
5V |
| Input Voltage (recommended) |
6 - 20V |
| Digital I/O Pins |
14 — 5 Provide PWM Output |
| PWM Digital I/O Pins |
5 |
| Analog Input Pins |
6 |
| DC Current per I/O Pin |
20 mA |
| DC Current for 3.3V Pin |
50 mA |
| Flash Memory |
48 KB (ATmega4809) |
| SRAM |
6,144 Bytes (ATmega4809) |
| EEPROM |
256 Bytes (ATmega4809) |
| Clock Speed |
16 MHz |
| Radio module |
u-blox NINA-W102 |
| Secure Element |
ATECC608A |
| Inertial Measurement Unit |
LSM6DS3TR |
| LED_BUILTIN |
25 |
| Length |
68.6 mm |
| Width |
53.4 mm |
| Weight |
25 g |
